Outlook Archive Using Received Date Instead of Modified Date

By default, Microsoft Office Outlook archives different items based on the item type:

• Email message: The received date or the last modified date and time, whichever is later.
• Calendar item: The last modified date and time or the actual date that an appointment, event, or meeting is scheduled for, whichever is later.
• Task: The completion date or the last modified date and time, whichever is later. Tasks that are not marked as completed are not archived. Tasks that are assigned to other users are archived only if the status is completed.
• Note: The last modified date and time.
• Journal entry: The date when the journal entry is created or the last modified date and time, whichever is later.
• Contact: Not archived.

After you create and configure the ArchiveIgnoreLastModifiedTime registry value, Outlook archives different items based on the following conditions:

• Email message: The received date.
• Calendar item: The actual date that an appointment, event, or meeting is scheduled for.
• Task: The completion date. Tasks that are not marked as completed are not archived. Tasks that are assigned to other users are archived only if the status is completed.
• Note: The last modified date and time.
• Journal entry: The date when the journal entry is created.
• Contact: Not archived.

 
Save the following to a .reg file and then double click the file to automatically add the entries to your registry.

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\Preferences]
"ArchiveIgnoreLastModifiedTime"=dword:00000001

[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Preferences]
"ArchiveIgnoreLastModifiedTime"=dword:00000001

[HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Preferences]
"ArchiveIgnoreLastModifiedTime"=dword:00000001
 
Source
http://support.microsoft.com/kb/2500686
http://support.microsoft.com/kb/2553550

How to configure Verizon UML295 with Cradlepoint 1400 as an auto failover WAN connection using a Sonicwall

Request Public IP from Verizon if necessary. As of this writing, it is a one time charge of $500.  Call Verizon customer service at 800-922-0204.

Plug Verizon USB device into Cradelpoint USB port 1.

Cradlepoint Settings:
Note: With Sonicwall, do not do IP passthrough.
    Navigate to System Settings->System Software
        In Firmware Upgrade click Check Again button. Apply any firmware update.
    Navigate to Internet->Connection Manager
        In WAN Interfaces section find USB device and verify Enabled is checked
        Verify State is connected
        Click Modem name
        Click Edit
    Navigate to Network Settings->WiFi / Local Networks
        Edit Primary LAN
            IP Settings tab
                Verify Enabled is checked
                Router Mode = NAT (default)
            DHCP tab
                DHCP Server = checked
            Click Submit

Sonicwall Settings:
Make sure to have latest Sonicwall firmware.  As of this writing, it is SonicOS Enhanced 5.8.1.12-65o.
    Navigate to Network->Interfaces
    Select desired interface.  For me it is X3
    Click Configure
        Zone = WAN
        IP Assignment = DHCP
        Host Name = CradlePoint
        Comment = CradlePoint Failover
        Click OK
    Navigate to Network->Failover & LB
        Check box for Enable Load Balancing
        Check box for Respond to Probes
        Configure Defalut LB Group
            On General tab, Add X3 to Selected Interface Ordering
            On Probing tab, uncheck Probe responder.global.sonicwall.com
            Click OK
        Configure X1
            Select Logical/Probe Monitoring enabled
            Choose Probe succeeds when both Main Target and Alternate Target respond
                Main Target = Ping, responder.global.sonicwall.com
                Alternate Target = Ping, 8.8.8.8
            Click OK
        Configure X3
            Select Logical/Probe Monitoring enabled
            Choose Probe succeeds when both Main Target and Alternate Target respond
                Main Target = Ping, responder.global.sonicwall.com
                Alternate Target = Ping, 8.8.8.8
            Click OK

To test from Sonicwall:
    Navigate to System->Diagnostics
        Dignostic Tools = Ping
        IP Address = 8.8.8.8
        Interface X3
        Verify Alive
       
        Dignostic Tools = TraceRoute
        IP Address = 8.8.8.8
        Interface X3
        Verify hops, route, and trace complete
       
To test from a computer
Create a new route with the test computers IP address.
    Navigate to Network->Routing and click Add button at bottom of screen
        Source = Create new address object. Give same name as test computer name.
        Destination = Any
        Service = Any
        Gateway = X3 Default Gateway
        Interface = X3
    Click OK
From test computer ping 8.8.8.8 and tracert 8.8.8.8. Verify reply and reachable.
Go to http://ipchicken.com/ and verify public IP

Source

http://www.sonicwall.com/app/projects/file_downloader/document_lib.php?t=TN&id=341

http://www.sonicwall.com/app/projects/file_downloader/document_lib.php?t=TN&id=334

http://www.cradlepoint.com/firmware/MBR1400

http://www.cradlepoint.com/products/branch-office-retail-pos/mbr1400-mission-critical-broadband-router

Outlook NK2 file locations

For Outlook 2003/2007 with Windows 2000, Windows XP, or Windows Server 2003:
The location of the nk2 file is C:\Documents and Settings\[User Profile]\Application Data\Microsoft\Outlook
The name of the NK2 file is identical to the Outlook profile name, with .nk2 extension.

For Outlook 2003/2007 with Windows Vista, Windows 7, or Windows server 2008:
The location of the nk2 file is C:\Users\[User Profile]\AppData\Roaming\Microsoft\Outlook
The name of the NK2 file is identical to the Outlook profile name, with .nk2 extension.

For Outlook 2010/2013 with Windows Vista, Windows 7, or Windows server 2008:
The nk2 file is located in C:\Users\[User Profile]\AppData\Local\Microsoft\Outlook\RoamCache
The name of the NK2 file is in the following format: Stream_Autocomplete_X_AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA.dat The X is the file index (usually 0) and AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA is a random 16-byte key in hexadecimal format.

For Outlook 2010/2013 with Windows XP:
The nk2 file is located in C:\Documents and Settings\[User Profile]\Local Settings\Application Data\Microsoft\Outlook\RoamCache
The name of the NK2 file is in the following format: Stream_Autocomplete_X_AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA.dat The X is the file index (usually 0) and AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA is a random 16-byte key in hexadecimal format.

A great utility to edit the file is NK2Edit

Source

http://www.nirsoft.net/utils/nk2_file_location.html

Win8 - Show All Apps Desktop Shortcut

 

Right click on the desktop and select New –> Shortcut
Enter the following

explorer shell:::{2559a1f8-21d7-11d4-bdaf-00c04f60b9f0}

Click Next

Name the shortcut “Show All Apps”
Click Finish

Changing IM name

Windows Live Messenger
1.    Log into http://profile.live.com/details/Edit/Name as that user
2.    Change Last Name
3.    Click Save
4.    Click on user’s name in upper right and click Account Settings
5.    Click Add or change aliases
6.    Click Rename
7.    Click Yes, rename my primary alias
8.    Select Use an existing email address as your primary alias
9.    Click Rename primary alias

AIM
1.    Log into https://new.aol.com/productsweb/?promocode=825969
2.    Create new account with user’s new email address

Skype
1.    Log into https://login.skype.com/account/signup-form
2.    Create new account with user’s new email address

Yahoo
Either create a new account at
1.     https://sa.edit.yahoo.com/registration

or create an alias

1.    Log into https://login.yahoo.com/config/login_verify2 as that user
2.    Click Manage your Yahoo! aliases
3.    Click Add an Alias
4.    Enter new user information and click Save

Changing Active Directory and Exchange User’s Name After Being Married

Follow these steps to updates a user’s username and email address after they have had a name change.

1.      Open Active Directory Users and Computers
2.      Navigate to the Employees Organizational Unit (OU)
3.      Right-click on the name of the employee for the name change and select rename
4.      Rename the employee
5.      Rename User dialog box appears

• Full Name should be correct
• First Name should be correct
• Last Name should be changed to the new Last Name
• Display Name will be changed in the above step
• User Logon Name should be changed to the new Last Name
• User Logon name (pre-Windows 2000) will be changed in the above step

6.      Open Exchange Management Console
7.      Under Recipient Configuration click on Mailbox to view all user mailboxes
8.      Right click the employee name and select Properties
9.      In the General Tab

• Change the Alias to match username changed in Active Directory Users and computers
• Click Apply button

10.     In the E-Mail Addresses Tab

• SMTP address with the new name should be bold
• Optional step - Highlight the old address, right click and select remove
• Click Apply Button, then OK

11.     Update the Offline Address Book, navigate to Organization Configuration and select Mailbox
12.     Select the Offline Address Book Tab
13.     Right click on the Default Offline Address Book select Update
14.     Click Yes in the dialog box

Digium Switchvox and Phone Wishlist

1. The ability to have more than 3-way call.  Having 4 way is a start but the ability to have at least up to 8-way would be awesome.

2. A way to export/import extension phonebook.

3. The ability to add a pause to a speed dial.

How to register a Digium phone via the web interface to a SoHo system

 

1. Create SIP Extension.
2. Get the IP address of the phone by clicking the More soft key.
3. Then select about and you will see the IP address.
4. Enter the IP address into your web browser like so <YOUR_PHONE_IP>/settings/?bypass_ui_check=true
5. If the phone has been locked you will have to enter the user name admin with the password 789
6. Once logged into the phone on the Digium Phone Settings Lines tab select the Line 1 tab.
7. User ID / Extension, Line Label on Phone should be the extension.
8. In the phone password field enter the Phone Password for the extension (NOT THE VOICEMAIL PASSWORD)
9. Under Primary Host enter the IP address of the PBX
10. In the port field enter 5060
11. Click Submit Phone Settings.

Source

http://kb.digium.com/articles/Configuration/How-to-register-Digium-phone-web-SoHo-system?retURL=%2Fapex%2FknowledgeProduct%3Fc%3DSwitchvox&popup=false

List of Uninstallers for Antivirus Software

Source
1. avast! Special note: Boot Windows to Safe Mode and run the uninstall utility. [ Download avast! Uninstall Utility ]

---

2. AVG [ Download AVG Remover 32-bit | 64-bit ]

---

3. Avira Special Note: Avira doesn’t have a removal tool but they do provide a registry cleaner to remove traces of Avira so that you can reinstall and then uninstall. This tool is in German, you’ll have to click on the button called “Keys auslesen” to search the registry for any issues. Then place checkmarks next to the registry entries you wish to delete and click the “Löschen” button to delete the keys. [ Download Avira RegCleaner ]

---

4. BitDefender [ Download BitDefender Uninstall Tool 32-bit | 64-bit ]

---

5. Computer Associates Special Notes: Computer Associates uninstaller requires internet connection to verify and download the full version of uninstaller. [ Download CA SupportBridge for 2008 | 2009 products ]

---

6. ESET Special Note: This is an unofficial dutch language ESET removal tool. [ Download NOD32Removal ]

---

7. F-Secure Special Note: The uninstaller will automatically reboot the computer without warning. [ Download F-Secure Removal Tool ]

---

8. Kaspersky [ Download Kaspersky Anti-Virus Remover ]

---

9. McAfee [ Download McAfee Consumer Product Removal Tool ]

---

10. Windows Live OneCare [ Download Windows Live OneCare Cleanup Tool ]

---

11. Norton / Symantec [ Download Norton Removal Tool ]

---

12. G DATA [ Download G DATA AV-Cleaner ]

---

13. Panda Security [ Download Panda Security Uninstaller ]

---

14. Trend Micro Special Notes: After download, extract and run TISTOOL.exe file. Click the Uninstall tab, and then click the Uninstall button. Select the Trend Micro program that you’d like to uninstall from the drop down box and click Uninstall. [ Download Trend Micro Diagnostic Toolkit 32-bit | 64-bit ]

---

15. AppRemover Special Note: AppRemover is an unofficial tool to uninstall security applications such as antivirus and antispyware from your computer. Other than able to support removal some of the antivirus above, it can also uninstall Spy Sweeper, Trend Micro PC-Cillin, SpyCatcher, Sophos, SpyBot, Spyware Doctor, Norman, Spyware BeGone, Ad-aware, Bazooka Scanner, SpywareBlaster, eEye Blink, ClamWin, CheckPoint, BullGuard, RISING and AhnLab V3 VirusBlock. [ Download AppRemover ] Phew that was long. I had this in my WordPress draft for many many months but didn’t have the time to finish it until today ;) Read more: http://www.raymond.cc/blog/comprehensive-list-of-uninstallers-or-removal-tools-for-antivirus-software/#ixzz2OeWjUHCl

URL Short

Web sites to preview URL shorts

http://decryptlinks.com/

http://www.unshorten.it/

http://checkshorturl.com/

Below is a list of common url shorterner service that people use with their corresponding way how you can preview the urls when you stumble upon one of these links.

Service	Shortened URL	Preview URL	Actions
TinUrl	http://tinyurl.com/6qldfg5	http://preview.tinyurl.com/6qldfg5	Add ‘preview’ in the url
Bitly	http://bit.ly/JKQruN	http://bit.ly/JKQruN+	Add ‘+’ at the end
Goo.gl	http://goo.gl/93YpX	http://goo.gl/93YpX+	Add ‘+’ at the end
is.gd	http://is.gd/5MCXeM	http://is.gd/5MCXeM-	Add ‘-’ at the end
Snipurl	http://snipurl.com/23b8x83	http://peek.snipurl.com/23b8x83	Add ‘Peek’ to the url
Tiny.cc	http://tiny.cc/74hmdw	http://tiny.cc/74hmdw~	Add tilda ‘~’ to the url
Budurl	budurl.com/6c4j	budurl.com/6c4j?	Add ‘?’ to the url
su.pr	http://su.pr/ASn3tX	http://su.pr/ASn3tX+	Add ‘+’ to the url
Fwd4.Me	Fwd4.me/6c4j	http://fwd4.me/6c4j?	Add ‘?’ to the url
Su.pr	http://su.pr/JKQruN	http://su.pr/JKQruN+	Add ‘+’ at the end
yi.tl	http://yi.tl/74hmdw	http://yi.tl/74hmdw~	Add tilda ‘~’ to the url

Bitly.com / bit.ly / j.mp / urls.im (and Bitly Enterprise sites like amzn.to, aol.it, atmlb.com, bbc.in, bhpho.to, binged.it, bloom.bg, cnet.co, huff.to, lat.ms, nyr.kr, nyti.ms, on.fb.me, on.mtv.com, on.vh1.com, oreil.ly, politi.co, tcrn.ch, usat.ly, wapo.st, yhoo.it, etc.

Install Android 4.2 on the Samsung Galaxy S3 (All Variants)

Prerequisites:

• Rooted Samsung Galaxy S3 (how to)
• Unlocked Bootloader (how to)

Downloads:

• Android 4.2 Download (please choose your carrier)
  • Verizon | T-Mobile | AT&T | Sprint | International | US Cellular | Metro PCS
• GAPPS (Google Apps) Download

Procedure

• Place the two files on your SD Card
  • *Download the files directly on the device to place them in your internal storage
• Download Rom Manager
  • *This is a free root required application that allows you to boot into recovery, manage roms, and manage backups.
• Reboot into Recovery
  • *Using Rom Manager, navigate to “Reboot Recovery”
• Backup your current rom
  • *Using the volume rocker as up/down, navigate to “backup”, and select with the power button.
• Clear Data and Cache
  • *Using your volume rocker as up/down, navigate to “Wipe Data/ Factory Reset”, and select with the power button. Then navigate to “Wipe Cache partition”, and select with the power button.
• Install the Android 4.2 rom
  • *Using your volume rocker as up/down, navigate to “Install Zip from Internal”, then navigate to the “download” folder, and select the Cyanogenmod 10.1 .zip file.
• Install the GAPPS
  • *Using your volume rocker as up/down, navigate to “Install Zip from Internal”, then navigate to the “download” folder, and select the GAPPS .zip file
• Reboot and Enjoy
  • *You’re done!

Please remember that rooting and flashing custom roms to your device can be very, very dangerous. AndroidGuys.com and myself are not responsible for any problems that may occur during this process. For an added tutorial, please view the attached video for a visual step-by-step tutorial.

 

Source

http://www.androidguys.com/2013/01/23/tutorial-run-android-4-2-on-the-samsung-galaxy-s3/

ActiveSync Errors on Android-Powered Devices

ActiveSync Errors on Android-Powered Devices

The error 'Setup cannot finish. This server requires security features your phone does not support'

This information applies to Exchange 2010 mailboxes.

These errors occur when there are too many mobile devices configured for the user's mailbox. To resolve the issue:

1. Log in to the user's account using Outlook Web Access (OWA).
2. Navigate to Options > Phone.
3. Review the devices that are configured, and remove any unneeded devices.
4. Re-activate the device that you are getting the error on.

The error 'Client/Server Conversion error'

The solution below should permanently resolve the error "Client/Server Conversion error" on devices with the Android operating system.

1. On the device, go to the Settings menu.
2. Select Applications, then choose Manage Applications.
3. Open the menu, select Filter, then select All to show all installed applications.
4. For each "Calendar" that shows up, select it and choose Clear Data for each in the Storage section.

The error 'Unable to open connection to server due to security error'

You may get this error on Samsung Galaxy SII Family phones.

1. Scroll down to the bottom on your device and look for notifications.
2. There will be the notification for security updates.
3. Select the security options and let them update.

Note: You may need to connect to WiFi to get activation message to appear. Click Activate.

Note: If the account on a Galaxy phone is configured correctly, but you cannot get it to sync, try power-cycling the device.

Entering email address and password fails and you are not offered any other fields

This situation might occur with the Droid 4 with the latest software updates installed.

1. Enter UserName@ServerAddress in the Email address field (correct settings can be found in HostPilot or My Services under Services > MS Exchange Server > ActiveSync).
2. Type in your mailbox password.
3. The options for the domain name, username and server name will appear. You can continue setting up the account with the correct settings.

OR

1. Enter any other email address or a fake email address.
2. The options for the domain name, username and server name will appear. You can continue setting up the account with the correct settings.
3. Change the email address to the real one when the setup is finished.

Source

http://hosting.intermedia.net/support/kb/default.asp?id=2326

AT&T APN Settings for Galaxy S3 SGH-I717

When you install custom ROMs on the AT&T Galaxy S3 SGH-I717, you might have to manually set your APN and 4G LTE PTA settings, here’s the settings you need:

Menu->Settings->Wireless & Networks More->Mobile Networks->Access Point Names.

For 4G LTE PTA/HSPA+:
Name: PTA
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri

For HSPA+:
Name: AT&T
APN: wap.cingular
Username:WAP@CINGULARGPRS.COM
Password:CINGULAR1
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN type: default,supl,mms

You can also use this method to switch between HSPA+ or 4G LTE on your phone to save battery life.

Disk Cleanup for Windows Server 2008 R2

 

The Disk Cleanup executable file cleanmgr.exe and the associated Disk Cleanup button are not present in Windows Server® 2008 or in Windows Server® 2008 R2 by default.

This is by design, as the Disk Cleanup button is part of the Desktop Experience feature. In order to have Disk Cleanup button appear on a disk’s Properties dialog, you will need to install the Desktop Experience feature.

So in order to use cleanmgr.exe you’ll need to copy two files that are already present on the server, cleanmgr.exe andcleanmgr.exe.mui. Use the following table to locate the files for your operating system.

Operating System	Architecture	File Location
Windows Server 2008 R2	64-bit	C:\Windows\winsxs\amd64_microsoft-windows-cleanmgr_31bf3856ad364e35_6.1.7600.16385_none_c9392808773cd7da\cleanmgr.exe
Windows Server 2008 R2	64-bit	C:\Windows\winsxs\amd64_microsoft-windows-cleanmgr.resources_31bf3856ad364e35_6.1.7600.16385_en-us_b9cb6194b257cc63\cleanmgr.exe.mui
Windows Server 2008	64-bit	C:\Windows\winsxs\amd64_microsoft-windows-cleanmgr.resources_31bf3856ad364e35_6.0.6001.18000_en-us_b9f50b71510436f2\cleanmgr.exe.mui
Windows Server 2008	64-bit	C:\Windows\winsxs\amd64_microsoft-windows-cleanmgr_31bf3856ad364e35_6.0.6001.18000_none_c962d1e515e94269\cleanmgr.exe.mui
Windows Server 2008	32-bit	C:\Windows\winsxs\x86_microsoft-windows-cleanmgr.resources_31bf3856ad364e35_6.0.6001.18000_en-us_5dd66fed98a6c5bc\cleanmgr.exe.mui
Windows Server 2008	32-bit	C:\Windows\winsxs\x86_microsoft-windows-cleanmgr_31bf3856ad364e35_6.0.6001.18000_none_6d4436615d8bd133\cleanmgr.exe

Once you’ve located the files move them to the following locations:

1. Cleanmgr.exe should go in %systemroot%\System32.
2. Cleanmgr.exe.mui should go in %systemroot%\System32\en-US.

You can now launch the Disk cleanup tool by running Cleanmgr.exe from the command prompt.

Disk Cleanup can now be run by entering Cleanmgr.exe into a command prompt, or by clicking Start and typing Cleanmgr into the Search bar.

Source

http://technet.microsoft.com/en-us/library/ff630161(WS.10).aspx

How to Restore ESXi Host Configuration

• Download vCLI (select release that matches your ESXi version) and install.
• Navigate to Start->All Programs->VMware->VMware vSphere CLI->Command Prompt.
• Type CD Bin.
• Type vicfg-cfgbackup.pl --server SRVNAME --username USER --password PASS –load "x:\host_cfg_backup\esxi5.bak"

How to Backup ESXi Host Configuration

 

 

• Download vCLI (select release that matches your ESXi version) and install.
• Navigate to Start->All Programs->VMware->VMware vSphere CLI->Command Prompt.
• Type CD Bin.
• Type vicfg-cfgbackup.pl --server SRVNAME --username USER --password PASS -s "x:\host_cfg_backup\esxi5.bak"

Exchange 2010 This mailbox database contains one or more mailboxes, mailbox plans, archive mailboxes, or arbitration mailboxes

So, let’s say you have a new installation of Exchange Server and you want to move all mailboxes, including Arbitration, from the default database created during the installation to a new mailbox database. Here is how to do it…

First of all, if you just try to delete the default database you will get this message:

Stating that the database isn’t empty, even though it does look empty if you do a get-mailbox for the specific database:

get-mailbox -Database “Mailbox Database 1905367170″

There is a switch that you should use if you want to see all mailboxes, even the “hidden” Arbitration mailboxes:

get-mailbox -Database “Mailbox Database 1905367170″ –Arbitration

This gives us different result then the first get-mailbox command:

As you can se the database isn’t as empty as we first thought. To move these mailboxes to the new database you can easily pipe the result of the get-mailbox command and create new move requests for all Arbitration mailboxes:

get-mailbox -Database “Mailbox Database 1905367170″ -Arbitration | New-MoveRequest –TargetDatabase “MailboxDatabase1″

You can check the status of the move request by running:

Get-MoveRequest -SourceDatabase "Database Name".

Make sure that all move requests have a status of Completed.

Before you can actually remove the database you will have to remove the Move Requests. To do this MAKE SURE that the requests have completed then run the following: Get-MoveRequest -SourceDatabase "Database Name" | Remove-MoveRequest.

Note if you deleted the arbitration accounts from Active Directory rerun the Active Directory preparation from the Exchange 2010 media:

Setup.com /PrepareAD

Source

http://msundis.wordpress.com/2010/03/29/show-and-move-hidden-arbitration-mailboxes-in-exchange-server-2010/

http://blog.chrislehr.com/2009/10/exchange-2010-what-is-arbitration.htm

Resizing Windows Server 2008 R2 virtual hard disk in VMWare ESXi

1. Use the vSphere Client to edit the settings of the server and change the size of the hard disk(s) to the new size;
2. On the server itself (RDP/console) run the Computer Management snap-in from the Administrative Tools menu;
3. Expand Storage and select Disk Management. The drive you have increased in size will probably still be showing as the original size. This is because the virtual disk manager caches this information. On the right hand side, click More Actions and select Rescan;
4. You should now see your new unallocated space. Right click on the *allocated* partition and select Expand.

 

Source

http://calvisblog.wordpress.com/2010/11/22/resizing-windows-server-2008-r2-virtual-hard-disk-in-vmware-esxi/

Increasing Exchange 2010 local move request limit

To increase this limit you can edit

%programfiles%\Exchange Server\V14\Bin\MSExchangeMailboxReplication.exe.config

and change the value for MaxActiveMovesPerTargetMDB to the number you want. Make sure you change it in both locations. I would probably not go over 5. 

Once you do that restart the Microsoft Exchange Mailbox Replication service and your moves should now do more at a time.

Source

http://osj42.blogspot.com/2011/11/increasing-exchange-2010-local-move.html

How to Import Self Signed Certificate in IE9

In Windows 7, navigate to

Start->All Programs

Right click on Internet Explorer

Run as administrator

Tools->Internet Options

Content tab

Certificates button

Import button

Click Next

Browse to saved certificate and click Next

Select Place all certificates in the following store and click Browse

Check Show physical stores

Expand Trusted Root Certification Authorities

Highlight Local Computer

Click OK, Click Next, Click Finish, Click OK, Click Close, Click OK